成都升降机的液压泵站在出厂时已调定系统压力；非专业维修人员，私自调节成都升降机泵站上的各个螺母都有可能对升降平台的正常使用造成十分严重的安全隐患。但是机械设备发生故障在所难免，下面成都升降机厂家为您解析液压泵站的调节办法。Chengdu hydraulic pump lift in the factory has been adjusting the system pressure; non professional maintenance personnel, to adjust each lift pumping station on the Chengdu nut may have normal use of the lifting platform caused very serious security risks. However, the failure of mechanical equipment is inevitable, the following Chengdu elevator manufacturers to resolve the hydraulic pump station for you to adjust the way.

普通在21~23Mpa，如想要调高压为，可将溢流式阀帽盖旋下，按从左到右的方向翻转视频调压内六角螺丝，每旋45°，压为约飙升1.2Mpa。相反，则控制压为；如需控制减退车速可由节流阀控制，策略：旋松节流阀的并紧螺母，第二翻转视频节流阀芯（从左到右为慢，相反为快），控制时每每翻转视频15°左右时间为宜。广州上下机控制好后再并紧螺母，制止节流阀跟旋。Generally in the 21~23Mpa, such as the need to increase the pressure, the valve cap can be screwed down, according to the clockwise rotation of the pressure regulating screw, each spin 45 degrees, the pressure increases by about 1.2Mpa. On the other hand, lower pressure drop; to regulate the speed can be adjusted by the throttle valve throttle valve and method: unscrew the nut, then rotate the valve spool (clockwise to slow and fast), adjust each spin around 15 degrees. Chengdu elevator adjustment and then tighten the nut to prevent the throttle valve with spin. 上海升降梯机电动伸缩卸荷阀动力系统单元测试卷在停机时，能用手动操作时放油阀控制卸荷实用功能，的方式：旋入手动操作时放油阀盖形小螺丝帽，其次逆时针中心点旋轉阀芯30°，需先卸荷。卸荷完毕后，再锁紧放油小螺丝，服务平台旋上盖形小螺丝帽并紧。Chengdu electric lift unloading valve power unit in the power outage, you can manually put the oil valve unloading function, manual method: unscrew the oil drain valve cap nut, then the counter clockwise rotation of the valve core 30 degrees, can be unloaded. After unloading, and then tighten the drain screw and screw on the cap nut and tighten. 苏州升降调节机机制的机器的日常日常正常的工作，就好似人之体魄。“養生”好过”治肿瘤“所以咧的机器的日常随时的护理算得 保障的机器蓄电量及的机器日常日常正常的工作的关健。Chengdu elevator machinery and equipment, such as the normal operation of the body. "Health" better "cure" so the normal and timely maintenance of equipment is the key to ensure the normal operation of equipment life and equipment. 重庆生降机完成期限换新油压机油泵油，期限审核各级螺母是否有接触不良，期限审核电子产品装置，期限审核油压机油泵装置。Chengdu elevator to replace the hydraulic oil regularly, regularly check whether each nut is loose, regularly check the electrical system, regularly check the hydraulic system. 重庆升降平台架机加工厂会认为，坐到如上什么时间，这样才能维持重庆升降平台架机经久长久不衰，持续性施用。一般的需调节器油缸调节阀的现状导致的之前，必然是这是由于没立刻进行更换油缸油出现油缸系统的油道堵住了导致的。Chengdu elevator manufacturers believe that, do the above, to ensure that the Chengdu elevator enduring, sustainable use. Generally need to adjust the situation of the hydraulic valve occurs, often because there is no timely replacement of hydraulic oil caused by hydraulic system caused by the blockage of the oil.